Tag Archives: overhead chain conveyor

China Hot selling Overhead Conveyor Chain Z-5t T5075 (Heavy Duty)

Product Description

Detailed Photos

 

 

 

Product Description

 The shape is simple, UH-7075-S is the basic style of the five-ton cross suspension chain, suitable for general overhead conveyor lines.
The traditional old five-ton chain (UH-5075) is a more widely used and more used suspension chain. Because this chain has a small pitch, it can run smaller curved rails, can hang more objects, and has many chain styles and cranes. With complete accessories and easy installation, it has always been the choice of suspension conveyors.

The 5-ton cross-shaped chain UH-7075-S is based on the design and transformation of the traditional 5-ton suspension chain UH-5075-S. It is not only a new appearance change, but also an important improvement in mechanical performance.

 

Spare parts item Features Photo
Up-Down track for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered.
Check track There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.
Take-up device

(Tensioner)

Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.
Make sure certain tensile force between driver and take-up device.   Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. 
Straight track for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters.
Caterpiller driver device Two types-Standard type and heavy duty type.
The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.
Hanger  
Several types hangers:

Cross type hanger;

Y type hanger;

I type hanger;

Sprocket wheel hanger;

U-type hanger;

Bearing hanger;

Customized.

Automatic oil sprayer Specially designed for various automatic conveying chain;

More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes.

 

 
 

 

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check
 

 

Material: Alloy
Structure: Roller Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Product Name: Suspension Conveyor Chain
Customization:
Available

|

Customized Request

heavy duty chain

Can heavy-duty chains be used in overhead or inverted applications?

Yes, heavy-duty chains are suitable for both overhead and inverted applications. Their robust design and high-strength materials make them capable of handling the challenges posed by such applications.

In overhead applications, heavy-duty chains are often used in lifting and hoisting equipment, such as overhead cranes and hoists. These chains are designed to withstand the vertical loads and dynamic forces involved in lifting heavy objects. They are also engineered to resist fatigue and wear, ensuring reliable and safe performance in repetitive lifting tasks.

In inverted applications, heavy-duty chains are used in situations where the chain is required to support loads from below. For example, they can be utilized in conveyor systems where the chain carries materials in an inverted position. In this configuration, the chain must be able to bear the weight of the conveyed materials while navigating turns and inclines.

When using heavy-duty chains in overhead or inverted applications, it’s essential to consider factors such as load capacity, environmental conditions, and maintenance requirements. Proper lubrication and periodic inspections are crucial to ensure the chain’s continued performance and longevity.

Overall, heavy-duty chains offer a reliable and durable solution for a wide range of industrial applications, including both overhead and inverted scenarios.

heavy duty chain

Can heavy-duty chains be used in overhead crane systems?

Yes, heavy-duty chains are commonly used in overhead crane systems due to their ability to handle heavy loads and withstand rigorous operating conditions. Overhead crane systems require reliable and durable components to ensure safe and efficient lifting and material handling operations. Here’s why heavy-duty chains are suitable for overhead crane systems:

1. High Load Capacity: Overhead crane systems are designed to lift and move heavy objects and materials. Heavy-duty chains are specifically engineered to handle significant loads, making them ideal for these applications.

2. Robust Construction: Heavy-duty chains are made from high-quality materials, such as alloy steel, that provide exceptional strength and durability. Their sturdy construction allows them to endure the stresses of repetitive lifting and movement in overhead crane systems.

3. Resistance to Fatigue: Overhead crane systems often involve repetitive lifting and lowering motions, which can lead to fatigue failure in lesser chains. Heavy-duty chains are designed to resist fatigue and maintain their performance over extended periods of use.

4. High-Temperature Resistance: In some industrial settings, overhead crane systems may operate in high-temperature environments. Heavy-duty chains are capable of withstanding elevated temperatures without compromising their strength and integrity.

5. Minimal Stretch: Heavy-duty chains exhibit minimal elongation or stretch under load. This property ensures accurate and consistent lifting, positioning, and material handling in overhead crane systems.

6. Precision Engineering: Heavy-duty chains are manufactured with precision and strict quality control to ensure uniformity and reliability. This precision contributes to smooth operation and reduces the risk of chain failure.

7. Corrosion Resistance: Overhead crane systems may operate in outdoor or harsh environments, where exposure to moisture and corrosive elements can occur. Heavy-duty chains are available with corrosion-resistant coatings to enhance their longevity and performance in such conditions.

8. Compatibility with Crane Components: Heavy-duty chains are designed to work seamlessly with other crane components, such as sprockets and sheaves, ensuring smooth engagement and efficient power transmission.

Overall, heavy-duty chains are a dependable choice for overhead crane systems, providing the strength, durability, and reliability needed for safe and productive material handling operations.

heavy duty chain

How does a heavy-duty chain differ from a standard chain in terms of design and strength?

A heavy-duty chain differs from a standard chain in several aspects of design and strength. Here are the key differences:

1. Design: The design of a heavy-duty chain is specifically engineered to handle heavy loads and harsh conditions. It typically has larger and thicker components, including plates, pins, and rollers, compared to a standard chain.

2. Material: Heavy-duty chains are usually made from high-quality materials such as alloy steel, stainless steel, or carbon steel with higher tensile strength and better resistance to wear and fatigue. In contrast, standard chains may use more basic materials with lower strength.

3. Strength: Heavy-duty chains are designed to withstand significantly higher loads and forces than standard chains. They are built to handle heavy impact loads and extreme conditions without failure.

4. Durability: Due to their robust construction and high-quality materials, heavy-duty chains offer superior durability and longevity compared to standard chains. They can endure repeated use and demanding applications without premature wear or stretching.

5. Application: Heavy-duty chains are commonly used in industries and applications that involve heavy machinery, large equipment, and extreme operating conditions. They are ideal for applications where standard chains may not be sufficient to handle the load or endure the environment.

6. Safety Margin: Heavy-duty chains often have a higher safety margin, which means they are designed to operate well below their maximum load capacity. This safety margin ensures added safety and prevents chain failure even during unexpected overloads.

7. Price: Given their more robust construction and higher-quality materials, heavy-duty chains are typically more expensive than standard chains.

In summary, heavy-duty chains are engineered for heavy-duty applications, offering greater strength, durability, and safety compared to standard chains. They are the preferred choice for industries that require reliable and high-performance chain systems to handle challenging and high-load situations.

China Hot selling Overhead Conveyor Chain Z-5t T5075 (Heavy Duty)  China Hot selling Overhead Conveyor Chain Z-5t T5075 (Heavy Duty)
editor by CX 2023-11-28

China wholesaler X348 X458 X678 Heavy-Duty Chain for Powder Coating Overhead Conveyor

Product Description

Detailed Photos

 

 

Product Description

Spare parts item Features Photo
Up-Down track for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered.
Check track There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.
Take-up device

(Tensioner)

Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.
Make sure certain tensile force between driver and take-up device.   Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. 
Straight track for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters.
Caterpiller driver device Two types-Standard type and heavy duty type.
The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.
Hanger  
Several types hangers:

Cross type hanger;

Y type hanger;

I type hanger;

Sprocket wheel hanger;

U-type hanger;

Bearing hanger;

Customized.

Automatic oil sprayer Specially designed for various automatic conveying chain;

More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes.

 

 

 

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check
 

Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Transport Package: Plywood Case.
Customization:
Available

|

Customized Request

heavy duty chain

What are the limitations of using heavy-duty chains in certain applications?

While heavy-duty chains are versatile and well-suited for many applications, there are some limitations to consider when using them in certain scenarios:

1. Weight and Size: Heavy-duty chains can be large and heavy, which may not be suitable for applications with limited space or weight restrictions.

2. Noise and Vibration: Due to their rugged design and high strength, heavy-duty chains can generate more noise and vibration compared to other chain types. This may be a concern in applications where noise reduction is essential.

3. Cost: Heavy-duty chains often come with higher manufacturing costs due to the use of premium materials and precision engineering. As a result, they may not be the most cost-effective solution for some low-load or less demanding applications.

4. Corrosion: While some heavy-duty chains are made from corrosion-resistant materials, others may be more susceptible to rust and corrosion in harsh environments. Proper maintenance and lubrication are essential to extend the chain’s lifespan in such conditions.

5. Operating Speed: Heavy-duty chains may have limitations in terms of operating speed compared to specialized high-speed chains. In applications requiring rapid movement, it’s essential to select the appropriate chain type.

6. Flexibility: The robust design of heavy-duty chains offers strength but may limit flexibility. In applications where the chain needs to traverse complex paths or tight bends, alternative chain designs may be more suitable.

7. Environmental Considerations: Heavy-duty chains may not be the best choice in environments with stringent environmental regulations or where lightweight, eco-friendly alternatives are preferred.

Despite these limitations, heavy-duty chains remain an excellent choice for many demanding applications, providing durability, reliability, and high performance under challenging conditions.

heavy duty chain

How do heavy-duty chains handle wear and tear in continuous operation?

Heavy-duty chains are designed to withstand the rigors of continuous operation and are built to handle significant wear and tear. Several key factors contribute to their ability to endure continuous use:

  • High-Quality Materials: Heavy-duty chains are typically constructed from high-quality alloy or carbon steels. These materials offer excellent strength, toughness, and resistance to wear, making them suitable for continuous operation.
  • Heat Treatment: Many heavy-duty chains undergo heat treatment processes, such as quenching and tempering, to enhance their hardness and durability. Heat treatment helps the chains maintain their structural integrity under prolonged stress.
  • Robust Design: Heavy-duty chains are designed with robust and precise engineering to distribute the loads evenly and minimize stress concentrations. This design feature prevents premature failure due to excessive wear in specific areas.
  • Lubrication: Proper lubrication is crucial in reducing friction and minimizing wear between the chain’s components. Lubricants help to dissipate heat generated during continuous operation and prevent metal-to-metal contact, extending the chain’s lifespan.

In continuous operation, heavy-duty chains are often found in various industrial applications, such as mining, construction, and material handling equipment. These chains are exposed to harsh conditions, heavy loads, and constant movement. The combination of high-quality materials, heat treatment, robust design, and proper lubrication ensures that heavy-duty chains can handle the demanding requirements of continuous operation.

Despite their durability, heavy-duty chains still experience wear over time. Regular maintenance, including inspection, lubrication, and replacement of worn components, is essential to prolong the life of the chain and ensure safe and reliable operation. By following proper maintenance procedures, the risk of unexpected failures and downtime can be significantly reduced, providing more efficient and uninterrupted operation in various industries.

heavy duty chain

What are the common types of heavy-duty chains used in industrial equipment?

Heavy-duty chains find various applications in industrial equipment where strength, durability, and reliability are crucial. Some of the common types of heavy-duty chains used in industrial machinery include:

  • Roller Chains: Roller chains are one of the most prevalent types of heavy-duty chains used in industrial machinery. They consist of cylindrical rollers that engage with the sprockets to transmit power and motion. Roller chains are widely used in conveyors, agricultural machinery, construction equipment, and material handling systems.
  • Drag Chains: Drag chains, also known as cable carriers or energy chains, are designed to protect and guide moving cables and hoses in various industrial applications. They are commonly used in robotic systems, CNC machines, and other equipment that require consistent cable management.
  • Engineering Class Chains: Engineering class chains are heavy-duty chains designed for demanding applications in industries like mining, forestry, and agriculture. They are used in conveyors, elevators, and other equipment that require heavy-load handling.
  • Leaf Chains: Leaf chains are used in forklift trucks, scissor lifts, and other lifting applications. They consist of interconnected plates (leaves) with pins to provide excellent tensile strength and resistance to fatigue.
  • Dragline Chains: Dragline chains are specifically used in dragline excavators and similar equipment for mining and heavy earthmoving operations. They are designed to handle extremely heavy loads and harsh conditions.
  • Bucket Elevator Chains: Bucket elevator chains are used in bucket elevators to vertically convey bulk materials like grains, fertilizers, and other granular materials. They are designed to endure the vertical lifting forces and abrasive materials.

These are just a few examples of the common types of heavy-duty chains used in industrial equipment. Each type of chain is designed to meet specific application requirements, and selecting the right chain depends on factors like load capacity, speed, environment, and the type of machinery involved.

China wholesaler X348 X458 X678 Heavy-Duty Chain for Powder Coating Overhead Conveyor  China wholesaler X348 X458 X678 Heavy-Duty Chain for Powder Coating Overhead Conveyor
editor by CX 2023-10-25

China factory Overhead Enclosed Track Heavy Duty Universal Link Conveyor Chain, Compatible with Popular Brands for Transmission System a2050 roller chain

Product Description

Product Description

UH-5075-S series conveyor chains have excellent extensity and capable of making any turn on both horizontal planes and vertical planes. Based on the actual needs of various process flows, the conveyor has been deliberately designed to run across relatively long routes and abstruction objects to transmit the work pieces along the scheduled route all the way to their destinations. In this way, UH-5075 can integrae all separate production steps into an automatic production line, which has greatly improved efficiency and product quality level and strengthen the management as well.

Features:

Overhead trolley conveyors are used in wide range of applications, including: manufacturing and assembly, warehousing and distribution of the goods.

Overhead chain conveyors system can prove to be cost effective as they reduce the use of carriers and allows large volumes to move rapidly through a process. 

Techncial Date
 

Kasin No.

UH-5075-S

Standard chain

 
UH-5075-HH

Heavy-duty chain

      

 UH-5075-HV

Heavy-duty chain

 UH-5075-HA

Heavy-duty chain

Suspension Spacing

(mm)

150+(150× N)              

150+(150 × N)

 150+(150 × N)                

150+(150 × N)               

Chain’s Weight

(kg/m) 

 4.2

 4.58

 4.83

 5.3

Single-span Weight

(≤kg) 

 35

 40

45

 50

Chain’s Allowed

Pull Force (≤kgf)    

 3/8822 0571 -57152031              Fax: 86~/8822 0571 -57152030

 
Http://kasinchain      

Material: Alloy
Structure: Chain Conveyor
Surface Treatment: Electroplating
Chain Size: P150mm
Feature: Heat Resistant
Chain Weight: 4.2–6.58kg
Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

drive chain type

Drive chains are used in a variety of industrial applications. Unlike roller chains, which are more efficient in terms of weight and size, drive chains slide on steel guides. Drive chains are often used for dirty work. Here’s what you need to know about the various types of drive chains. In this article, we’ll look at pin chains, engineered steel chains, bushing roller chains, and timing chains. These types are the most common and the most commonly used.

time chain

There are several factors to consider when deciding which drive chain to buy. What matters is how long the chain will last, as the timing chain will stretch over time. However, they are pre-stretched during manufacture to reduce the risk of stretching. Timing chains can also be noisy compared to toothed belt drives, but rails and chain tensioners can alleviate this problem. Timing chains also wear slower than belts, reducing repair costs.
Timing chains require little maintenance compared to belt drives. When well lubricated, timing chains require little maintenance. The only maintenance really required is checking the engine oil level and following the manufacturer’s recommended service intervals. Timing chains of drive chains are also safer than belt drives and can be dangerous if the toothed belt tears. Also, the timing chain only needs minor repairs and replacements. Garages can purchase complete timing chain kits that contain all the parts needed for repairs.
Drive chains can be equipped with roller chains or timing chains, depending on the load on the engine. The style of the timing chain depends on the type of motor used. However, the roller chain is the most common choice due to its high strength and NVH properties. The roller chain has two tabs pressed into the eyes, and two rollers above them. These components work together to improve engine performance.
Many modern vehicles use timing chains. Timing gears synchronize the camshaft and crankshaft so that the valves open and close at the appropriate times. This is critical to the running quality, power output, and fuel consumption of the engine. The timing chain also reduces the amount of pollution emitted by the vehicle. Over the past two decades, many OEMs have turned to time chains for OHC/DOHC engines.

pin chain

Steel pivot chains feature open barrels to reduce blocking and material buildup. These chains are designed for power transmission and transportation applications, often used in agricultural applications. They can be custom welded using specialized accessories. These chains can be used in agricultural, industrial and municipal applications. Here’s a closer look at each. Read on to learn about the benefits of steel pivot chains.
The Long Pitch Class 700 Pivot Chain is a versatile chain for conveying and lifting products. Its T-head pins fit snugly so dust doesn’t get into the pin holes. It is also constructed with a closed bearing structure to prevent elongation due to wear. Steel pivot chains are designed for high fatigue applications and are versatile.

Engineering Steel Chain

Engineered steel drive chain provides maximum power transfer while minimizing weight. Engineering chains are often used for tough oil drilling operations. Designed for durability and tight tolerances, these chains can be used in a variety of industrial equipment. Whether you need to lift heavy objects or store a lot of items, engineered steel chains will do the job. Read on to learn more about the benefits of engineering chains.
Engineered steel chains consist of links or pin joints with large gaps between the components. The material of these chains is designed to handle abrasives. While many of these chains are used as conveyors, some are designed for drives. You can find these chains on conveyors, forklifts, bucket elevators, oil rigs and more. To get the most out of them, they should be able to withstand the power produced by the prime mover.
The chain can withstand high tensile stresses and is ductile enough to withstand fatigue. The center-to-center distance between the chain and sprockets is between 30% and 50% of the pitch. On smaller sprockets, the arc of contact between the teeth and chain must be at least 120 degrees. The resistance of the chain drive depends on the use environment, including vibration, noise, fatigue strength and other factors.
There are many types of engineering steel drive chains, each with a different function. The most commonly used type is the elevator. Its lift mechanism raises and lowers the carriage. Most cranes are attached to the load with hooks. Another type of chain is the oval link. Its links are welded and the sprocket has receivers for each link. It is used in low speed applications for elevators, chain hoists and anchors in offshore operations.

Bushing Roller Chain

Typically, a bushing roller chain as a drive chain consists of two link assemblies. The inner link consists of two plates held together by two sleeves, while the outer link consists of two plates connected by pins that pass through the inner link. However, there are some differences between bushing roller chains. The main difference is the type of link and the amount of lubrication required. If you want to learn more about bushing roller chains, keep reading.
While roller chains are generally stronger and more durable than bushing chains, they are not immune to wear. During the driving cycle, they lengthen and undergo a process called articulation. The rate at which they elongate depends on the lubrication and load applied to them. The frequency of pin and bushing articulation is also critical. Like other wear parts, the manufacture of critical wear parts requires close attention to detail to ensure optimum performance. Correct raw material selection, part fabrication, and assembly are key factors in achieving optimum performance. Improperly prepared parts can affect wear life and performance.
Consider your application and load distribution when selecting a bushing roller chain as your drive chain. The length of the chain must be between 30 and 50 times its pitch. The arc of contact between the small sprocket teeth must be at least 120 degrees. The resistance of the drive chain depends on the usage environment, which will determine its fatigue strength and vibration level. It’s a good idea to check the chain length before deciding to replace it.
chain

flat top chain

The TSplus flat top drive chain is the most flexible conveying medium on the market today. They can be connected end-to-end to create extended conveyor lines. The side bend design allows it to be used with a variety of conveyor types including inline, snake, and carousel conveyors. These chains are available in a variety of sizes, ranging in width from 3 feet to 20 feet.
A variety of materials are available for flat-top chains, including steel and plastic. Steel chains are ideal for applications requiring wear resistance. They are sturdy and well made. Plastic chains are particularly durable, but not suitable for harsh environments. Stainless steel flat top chains are suitable for a variety of applications, and some manufacturers make them from stainless steel or even aluminum. If your application requires a durable flat top chain, choose a chain made from iwis hardened stainless steel.
Another type of flat-top drive chain is the side bend chain. Suitable for flexible machinery requiring efficient conveying. It is equipped with a single hinge pin or double hinge pin. Either option will do, but each hinge pin has its advantages. Single hinge pin chains are suitable for smaller light-duty conveyors, while double hinge pins are more suitable for medium and heavy-duty applications.
CZPT is a modular flat top chain conveyor system. Its standardized components and modules can be easily integrated into any production process. And because it’s a single track, you can lengthen or shorten it as needed. Its versatile design makes it compatible with other conveyor systems such as belts and sprockets. This monorail modular design allows system lengths up to 40 meters and is compatible with other conveyor systems.

China factory Overhead Enclosed Track Heavy Duty Universal Link Conveyor Chain, Compatible with Popular Brands for Transmission System   a2050 roller chainChina factory Overhead Enclosed Track Heavy Duty Universal Link Conveyor Chain, Compatible with Popular Brands for Transmission System   a2050 roller chain
editor by CX 2023-06-07

China Custom CZPT Electroplating wooden case/container Standard Chains and Special overhead conveyor Industrial Chain with Great quality

Product Description

ISO16949: 2009 Accredited Industrial Chain 

Why Decide on Us? 

one. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd proven in 1991, we have 5 subsidiaries in china and have 6 subsidiaries abroad
2. we covering a production region of two hundred,one hundred sq. meters, have a lot more than 1,800 sets of advanced gear and above 3,a hundred extremely competent employees, the annual creation capacity has exceeded twenty,000,000meters
3. we specialised in producing all varieties of regular chains and unique chains, these kinds of as A or B sequence chains, driving chains, conveyor chains, hoisting chains, agricultural chains, sprockets, industrial chains, sprockets, gears, wheels and so on
four. we have acquired ISO9001, ISO14001, ISO16969, CZPT and API certificates.

5. Our associates among world best enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth.
 

1. Industrial Chain Components

2. Creation movement chart
one. Incoming content
2. Inspection
three. Manufacturing of chain board (chilly roll steel/punch/warmth treatment method/shot blasting/cleaning)
four. Production of roller(burr wiping & smear/heat treatment/wiping grinding/cleansing)
5. Manufacturing of quill(burr wiping & smear/centerless cylindrical grinding/heat treatment/shining)
6. Production of shaft(chopping/chamfering/heat treatment/ centerless cylindrical grinding/cleaning)
seven. Assembling
eight. Closing inspection
nine. Packing

3. Certification


4. 
Company Information

HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd was founded in 1 9 9 1, and now it has five wholly owned subsidiaries, one in ZheJiang  province, other four in HangZhou, ZHangZhoug province, it is a professional manufacturer of chains, sprockets, tooth gears and various power transmission products.

 

The group has XIHU (WEST LAKE) DIS.HUA, ZIQIANG brands, is focused on producing all variety of standard roller chains and special chains, such as conveyor chain, stainless steel chain, agricultural chain. With Xihu (West Lake) Dis.hua brand registered in more than 70 countries like America, Europe, Japan, it is building long term cooperation with these world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR. 

 

There is a technical center of province level, Xihu (West Lake) Dis.hua academician working station, experiment station for Xihu (West Lake) Dis.hua post doctors, and national hundreds of program set up in Xihu (West Lake) Dis.hua group. With these platforms and strong technical ability, the more than hundreds of Engineers and technicians have developed all variety of special high precise and high strength products, conducted mold programs for key components in the car and national industry revitalizing program. 

 

Great attention has been paid on environmental protection and energy saving. The product well displays environmental protection and energy saving. In the year of 2 0 0 0, Xihu (West Lake) Dis.hua took the lead in gaining I S O 1 4 0 0 1 environment management certificate and thereafter passed the inspection of clean production and recycling economy, winning the title of “ZHangZhoug Green Enterprise”.

 

“We are always serving our customers with our best products.”

What is a roller chain?

What is a roller chain? A roller chain is a transmission method that transmits power from a single shaft to another. Interior lubricant aids chains very last for a longer time and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is often used in meals processing machinery or in environments the place lubrication is problematic. Brass and nylon are also often employed. If you want to sluggish down the equipment, nylon chains can be employed.

Roller chains are utilized to transmit electrical power from 1 shaft to an additional

Typically talking, the life of a roller chain is restricted by 3 primary elements: put on, corrosion, and fatigue. These can be minimized by subsequent some easy suggestions. For optimum performance, the roller chain have to be lubricated. Suitable lubrication decreases friction and extends solution lifestyle. Don’t forget that corrosion and wind resistance can adversely affect lubrication, so shield the solution appropriately.
A chain is a mechanical unit employed to transmit energy from one particular shaft to one more. The chain is made up of a sequence of steel plates referred to as bushings. Bushings are connected to the roller chain by pins or bushings. The block and bushing are held collectively by pins or bushings C riveted to the outer link D. The chain is also connected to the sprocket and bucket by pins or hooks. Chain pitch is calculated in between hinge centers, generally denoted p.
There are three types of chains: single-strand regular series, multi-strand regular sequence, and silent chain. Solitary strand chains are the most frequent kind and protect a broad selection of drive loads. Multi-strand chains offer better electrical power potential with no increasing chain pitch or line speed. An inverted tooth chain is a variant of a one-strand chain that removes the sound caused by pitch-associated friction.
The inner and outer plates of the roller chain generate are produced of metal. The rollers are positioned evenly amongst the chain links and are fixed to the sprockets. In addition, the rollers can rotate freely inside of the bushing. The chain backlinks are arc-shaped and mesh with the sprocket enamel to transmit electricity via the chain.
Chain drives are an additional common way of transmitting mechanical energy. These are the most basic forms of energy transmission and are employed on conveyor belts and other minimal-velocity purposes. The chain wraps around the sprocket and passes through the sprocket whose tooth mesh with the links. This mechanism transfers mechanical power from a single shaft to one more, rising velocity.

They are interchangeable

There are many distinct sorts of roller chains, but most are produced of steel. Even though they have their very own rewards and characteristics, they are generally interchangeable. You can acquire distinct types of roller chains from domestic and overseas manufacturers, and you can choose the a single that ideal satisfies your needs. Bearing Providers can assist you decide on the correct bearing for your application needs and price range. Below are some important things to consider ahead of buying a roller chain. Right here are some ideas to make it easier for you to get the correct type of chain.
When picking the correct roller chain, be sure to consult the available measurement charts. Depends on how much chain you need to go the load you want to shift. Keep in mind that roller chains can be created to in shape a range of machines and need to meet up with your distinct wants. Also, the chain should be lengthy enough for the device you are using. Make positive to buy a chain created of high-good quality supplies.
Double pitch roller chains have a flat top surface and are employed in numerous different conveying purposes. Double-pitch load-carrying roller chains, also identified as outsized roller double-pitch chains, have rollers that lengthen past the sidebars to carry goods. Double pitch travel series roller chains are utilized in elevators, lengthy conveyor drives, agricultural machinery, and commercial sprinkler techniques.
The tensile energy of a roller chain is a important aspect to consider ahead of purchasing a chain. The tensile strength of a chain is a operate of the optimum power the chain can endure ahead of breaking. The 3 diverse sorts of tensile strength depict the drive a chain can withstand with no breaking. Every single chain also has diverse strengths that can establish the variety of chain you require.
The outer and internal hyperlinks of the roller chain are designed for bearings. This makes it possible for the chain to be paired or unpaired with its interior hyperlinks. The outer url has a pin, and the inner and outer pins are press-suit into the connecting plate. These links are normally manufactured of metal and have a tensile power of about 20 times their excess weight. The tiredness energy of two-pitch offset hyperlinks is the very same as that of the base chain.

They reduce use with inner lubricants

In a roller chain, the pins and bushings rotate inside of the chain without lubricant on the outside the house. They are in get in touch with with the tooth of the sprocket and can effortlessly put on out if not lubricated. The plates that hook up the backlinks and pivot about the pins can also rub from every other and cause put on. This is in which lubricants appear in helpful. Without having lubricant, the bare metal of the plate and bushing would rub in opposition to every single other.
The lubricant ought to have the appropriate viscosity to penetrate crucial interior surfaces and form an effective oil movie. Advised viscosities are listed in Table 1. Lubricants need to be clear and non-corrosive. For roller chains, a great quality non-clear petroleum base oil is sufficient. While defoamers are not necessary, other additives such as antioxidants and severe pressure inhibitors may be helpful. Even so, impure oils need to be prevented thanks to the chance of damage.
The condition of the spray head 10 overlaps with a traditional push chain 12. The drive chain consists of a plurality of rollers 24 and roller hyperlink plates 26. Each and every roller includes a roller pin 29 and is linked to a pair of pin url plates 28. Most generate chains have essential dress in factors on the sides of the roller pins 29. The condition of the spray head ten prevents overspray on to the central part of the roller.
In addition to preventing wear, these chains have unique technical specs. Company CZPT requires uncooked substance suppliers to certify that their merchandise satisfy specifications set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For security, the equipment must be turned off just before trying to evaluate the chain. After the method is shut down, the measurement approach should be finished in accordance with safety procedures.
General spray oil has lubricating qualities, but is not as great as other sorts of chain lubricants. These are generally employed for rust defense and contain antioxidant chemical substances. Generally, they are inexpensive and broadly available in retail merchants. Nevertheless, they have the drawback of being very penetrating and tough to utilize evenly. Oil are not able to keep on the chain as it spins, which can speed up use and corrosion.

They can be employed to velocity up or slow down machines

Usually, roller chains are chains utilised to shift mechanical program factors. In contrast to belts, roller chains can be utilized to speed up or sluggish down a machine. The primary distinction between belts and roller chains is the lubrication process. Belts use lubrication to support them go at a continual pace, but must not exceed the essential speed of the roller chain. This crucial pace is not straightforward to decide and lubrication is crucial to its lifestyle.
A roller chain is a chain consisting of a metal bushing that retains the internal plate A and pins C jointly. Pin C is riveted to outer hyperlink D, whilst roller R surrounds each and every bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, decreasing friction.
The chains can be one-stranded, double-stranded, or multi-stranded. The rated energy capability of the solitary strand chain can meet various drive load needs. Multi-strand chains give higher power potential with out escalating chain pitch or line velocity. The silent chain, also acknowledged as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide finishes of the sidebars and outer backlinks.
Although roller chains are a widespread mechanical element, they can are unsuccessful below particular situations. The most typical result in of extreme put on is incorrect to load sizing. Every company sets a maximum workload for its merchandise. A chain that is way too tiny for the load carried will not run smoothly and could cause premature failure. Chains can also are unsuccessful owing to rust or improper maintenance.
There are numerous techniques to pick the correct dimensions roller chain. The best way to pick the proper one particular is to use a horsepower chart to decide the speed of the motor. RPM will establish the dimension of the chain and the number of enamel on the generate sprocket. Conveyor chains offer you a variety of options to shift items horizontally or vertically, even about bend radii.

China Custom CZPT Electroplating wooden case/container Standard Chains and Special overhead conveyor Industrial Chain     with Great quality